![background image](http://html1.mh-extra.com/html/fadini/junior-633/junior-633_instruction-manual_3214703024.webp)
2
3
1
Pic. 10
Pic. 9
Pic. 8
electro-mechanical sliding gate operator
JUNIOR 633
JUNIOR 650
ANCHORING THE JUNIOR
English
ELECTRICAL POWER SUPPLY TO THE PROGRAMMER
DISTINCTION OF JUNIOR INSTALLED ON THE RIGHT OR LEFT
24
The first operation to be performed is to identify the Junior installation with respect to the opening of the gate, moving dip-switch n° 11 on
the Elpro 65 programmer (already installed on the Junior 633/Junior 650), depending on the position of Junior as seen inside the gate to be
opened (Pic. 10).
17
2 mm
!
ATTENTION
: disconnect
the 230 Vac electrical power supply
from the electrical system
!
NO
230 V
V
2
opening direction
opening direction
Junior installed to the
LEFT
:
position dip-switch
n° 11
to
OFF
OFF
11 12
Junior installed to the
RIGHT
:
position dip-switch
n° 11
to
ON
ON
11 12
Terminal board for Junior
power supply
Summary of Contents for Junior 633
Page 55: ...JUNIOR 633 JUNIOR 650 55...