![background image](http://html1.mh-extra.com/html/fadini/junior-633/junior-633_instruction-manual_3214703023.webp)
- n° 1 base plate
- n° 4 anchor bolts
- n° 8x M10 hexagonal nuts+washers
47 mm
Junction box
English
electro-mechanical sliding gate operator
23
JUNIOR 633
JUNIOR 650
CASING OPENING
ANCHOR PLATE
Pic. 5
Pic. 4
ANCHORING WITH A BASE PLATE
ANCHORING WITH PLUGS (not supplied)
Pic. 7
Pic. 6
!
ATTENTION
: once the two side screws have
been removed, lift the casing and vertically
pull it out, without tearing off the led card
cable connector.
Position and anchor the base plate at a distance of
60 mm
from the
gate to be opened, levelling it flat.
It is important that the threading should project
40 mm
from the
ground.
ATTENTION
: the nut under the plate must be
47 mm from the end of the bolt.
60 mm
!
40 mm
60 mm
!
Junction box
Summary of Contents for Junior 633
Page 55: ...JUNIOR 633 JUNIOR 650 55...