EZ-SET
®
Torsion Spring System
Assembly Installation Instructions
EZ-SET
®
Torsion Spring
System Assembly
Installation Instructions
These instructions are to be used in conjunction
with your standard installation manual. Follow
the manual up through “Assembling & Installing
the Track” — except
leave a minimum of
1
/
2
" per
side between track and door
, and just loosely
(temporarily) attach
3
/
8
"-16 x
3
/
4
" carriage bolt
in flag bracket.
Please read and understand these instructions
completely before proceeding with the instal-
lation of the EZ-SET
®
Torsion Spring System.
Carefully follow these instructions to avoid
personal injury or property damage.
Use these instructions for the
EZ-SET
®
Torsion
Spring
System
only. (If you have regular
torsion springs, extension springs, or the
EZ-SET® Extension Spring System see the stan-
dard Installation Manual.)
Tools Needed
•
3
/
8
" Medium duty reversible power drill
•
3
/
8
" Open end wrench
•
3
/
16
" Hex wrench
•
1
/
8
" Drill bit
•
1
/
4
" Insert bit (included)
In the interest of safety this symbol means
WARNING or CAUTION. Personal injury
and/or property damage may occur unless
instructions are followed carefully.
All REfERENCES TO lEfT hANd ANd RIGhT hANd ARE mAdE ASSUmING
ThAT yOU ARE INSIdE ThE GARAGE lOOkING OUT.
