Via Mantova 177/A - 37053 Cerea (VR) Italy
Tel. 0442 330422 - Fax 0442 331054
e-mail: [email protected] - www.fadini.net
Installer' s stamp
The manufactory firm reservescthe right to modify this manual without notice, in addition it
assumes no responsability forpossible errors or damages to things or persons.
For optimum performance of system over time according to safety regulations, it is necessary to perform proper maintenance and
monitoring of the entire installation for the automation, the electronic equipment installed and for the cabling connected to these. The
entire installation must be carried out by qualified technical personnel, filling out the Maintance Manual indicated in the specific Regulation
Book to be requested:
- Electromechanical automation: maintenance inspection check at least every 6 months.
- Electronic equipment and safety system: inspection check at least once every months.
- Ordinary and extraordinary maintenance must be agreed to between the principal and the maintenance firm.
-
Dispose of the packaging containers, such as the cardboard, plastic sheeting, foam padding, etc., through specialized
waste disposal firms.
-
Dispose of waste or toxic substances properly.
ORDINARY MAINTENANCE AND DISPOSAL
Directive
2003/108/CE
Disposal of electrical and
electronic goods
Disposal of substances hazardous
for the environment is prohibited
GB
The development of the firm MECCANICA FADINI has always been based upon the guarantee of the quality of its products and on the
existence of TOTAL QUALITY CONTROL' s system, which has guaranteed the maintance of quality levels over time and a constant updating
of the European Regulations, in the framework of a continuos process of improvement.
TECHNICAL SPECIFICATIONS AND DIMENSIONS
316
293
140
102
62,5
40
170
38
210
95
40
170
210
296
55
290
160
Technical specifications
Electrical power supply
230V - 50Hz
Motor voltage
24Vdc
Max Electrical power absorbed
220W
Max current absorbed 6,3A
Maximum thrust force
400N
Gate maximum weight
400Kg
Motor revolutions
3000rpm
Speed
12m/1'
Ratio
1:45
Protection grade
IP54
Lubrification grease
Operational temperature
-20°C +50°C
Junior 624 weight
11 Kg
Service cycle: 30s opening/closing - 20s pause
Complete cycle time: 100s = 36 cycles/hour
meccanica
FADINI
Meccanica Fadini declares under its own responsability that the model JUNIOR 624
is an electromechanical gate opener conceived for being
sold and installed in an "automated system" with original accessories and components indicated by the Manufacturing Firm.
The installer must leave apersonal Declaration of Conformity and perform all necessary tests so as to make the system compliant with the regulations.
The manufacturing firm assumens no responsability for the improper use of the product.
The product has been deemed compliant with the following specific regulations:
- Analysis of Risks and successive procedures for eliminating them:
EN 12445
e
EN 12453
- Low Voltage directive
2006/95 CE
- Electromagnetic Compatibility Directive
2004/108/CEE e 92/31 CEE
- Directive R&TTE
99/5/CE
System and notify laboratory DM 2004/108/CE:
Institute of Research and Collaudi of M.Masini srl - moscova street,11 20017 Rho (MI)
Noti CE 0068 - Creditated SINCERT 047A - Accreditato SINAL 0019
Conformity according to the following norms: UNI EN 1324-1, UNI EN 12604, UNI EN 12605, UNI EN 12445, UNI EN 12453
Decleration of conformity of Manufacturer
Via Mantova 177/A - 37053 Cerea (VR) Italy
Tel. 0442 330422 Fax 0442 331054
[email protected] - www.fadini.net
meccanica
FADINI
Il Responsabile
Data:
03-03-10
316
Junior 624 - 24V dc
meccanica
FADINI
GB
pag 24
