21
On the left side of the engine, remove the wiring harness holder from the stud on the front of the head; it
will hit the steering shaft after install.
Oil filter relocator
⅜
” Hex key, 8mm socket, ratchet, Teflon tape, ratchet extensions,
⅞
” wrench, vise grips
Pipe fittings, oil filter relocator
The filter on the engine has a metric thread while the relocator does not.
Do not use the spin-on adapter in the relocator box, it has the wrong thread. Use the loose
adapter.
Remove the oil filter that comes on the engine and discard.
Summary of Contents for 15471
