101
Starting the engine
Oil, Coolant
If not already done, fill the engine with 8 quarts of the correct oil.
If not already done, fill the engine with coolant through an inline filler or radiator cap. To help remove air
from the system, remove the top cap until coolant starts going up the tube then recap and hose clamp.
Fill the coolant overflow container.
Set the Fuel pressure regulator to the correct pressure as described in the Ford Racing engine control
instructions.
Start the engine and allow the engine to get up to 195°F- 200°F then allow to cool completely, it will suck
coolant from the overflow.
Cooling fan is switched on at 195°F, turns off at 190°F. This is based on inferred engine coolant
temperature. Engine coolant temperature is inferred from the cylinder head temperature. Inferred
coolant temperature may not be the same as actual coolant temperature.
Once cool, check the radiator/inline filler neck and coolant overflow container. Top up with coolant if
necessary.
Summary of Contents for 15471
