67
Run the orange wire along the outside of the harness going to the accelerator pedal.
The Ford cooling fan cicuit includes a fuse and relay in the black box.
There are two ways to wire the cooling fan:
o
Run the orange wire over to the fuse panel and use the Orange Ford wire to control the
relay in the chassis harness. This would put a second relay and fuse in the circuit. The
good side of this is that you can easily access the fuse and relay in the fuse panel. The fuse
in the fuse panel would be the one that would burn out if there is a problem and you would
not have to go into the black box ever. The down side is now you have 2 relays in the
circuit.
o
The alternative wiring is to only use the black box fuse/relay and bypass the fuse panel.
Both wiring methods are described below
Wiring using the fuse panel
Summary of Contents for 15471
