97
Power Distribution
Wire cutters/strippers, electrical tape, wire crimpers.
We used an extra starter solenoid for power distribution in these instructions. A distribution post is
provided in the Coyote kit.
The solenoid on the starter is the one being used to start the engine.
Locate and attach the power distribution post to the 2”x 2” tube.
Shorten and attach the red wire from the black box to the power distribution post using one of the yellow
ring connectors.
Attach a ring connector to the 10 ga red wire.
Attach the 10 ga wire ring connector to the post.
Run the 10 ga wire to the battery side of the starter solenoid on the engine.
Cut the wire to length and attach another yellow ring connector.
Summary of Contents for 15471
