100
Push the mass air plug onto the mass air meter.
Exhaust
15mm, 17mm sockets, 15mm wrench
Coyote headers, straight pipes
The threads in the heads for the headers changed a couple times
during production Be careful when installing the headers bolts so
the threads are not ruined. After removing the headers studs,
compare the thread to the new header bolts.
Production header bolt change dates:
From 3-22-10 to 9-8-10 M10 x 1.50 Coarse
From 9-8-10 to 1-18-11 M10 x 1.25 Fine
From 1-18-11 M10 x 1.50 Coarse
FFR supplies the course bolts only. If the fine thread bolts are needed, the specifications you
require when you purchase the bolts are: M10 x 1.25mm x 25mm long grade 8.8 hex head bolt
Insert and tighten all of the bolts by hand before tightening any with a wrench.
Attach the headers to the engine.
Attach the connector pipes to the headers and kit exhaust system.
Summary of Contents for 15471
