1257014-GB_v1.1
STD-1EU / STD-2EU
4
Note: If the security contact is not connected (option 1 and/or 2 of the input switch at ON), you
must have the option 1 and/or 2 (TEST SEG. CERRAR / TEST SEG. ABRIR) of the option switch 2
at OFF.
INPUT SWITCH
Option No. Lower position - OFF
Upper position – ON (default option)
1
Security Close contact connected
Security Close contact not connected
2
Security Open contact connected
Security Open contact not connected
3
Security Close edge connected
Security Close edge not connected
4
Security Open edge connected
Security Open edge not connected
5
Stop button connected
Stop button not connected
6
End of run close for motor 1 connected
End of run close for motor 1 not connected
7
End of run open for motor 1 connected
End of run open for motor 1 not connected
8
End of run close for motor 2 connected
End of run close for motor 2 not connected
9
End of run open for motor 2 connected
End of run open for motor 2 not connected
TIMERS
Colour Controlling Minimum
Maximum
Blue Motor
power 25% 100%
TIMES
Controlling Minimum
Maximum
Motor operating
3s
120s
Wait for automatic close
3s
120s
Gap between motors
0s
120s
LIGHT INDICATORS
Function Indicates
Default
status
POWER Alimentation
Normally
on
SEG. Security
Normally
off
PARO
Stop button
Normally on
ALT
Open/close function
Normally off
CERRAR Close
function Normally
off
ABRIR
Open function
Normally off
PEAT
Pedestrian function
Normally off
FCA M2
End of run open for motor 2
Normally on
FCC M2
End of run close for motor 2
Normally on
FCA M1
End of run open for motor 1
Normally on
FCC M1
End of run close for motor 1
Normally on
SEG.ABR. Security Open edge
Normally on
SEG.CER. Security Close edge
Normally on
SECURITY EDGE CONNECTION
No. of security edges
Open Close
Connections
- -
Default
option
-
1
Turn option 3 on the input switch to OFF.
-
2
Turn option 4 on the input switch to OFF. Cut off jumper BS.CE
1
-
Turn option 3 on the input switch to OFF.
1
1
Turn option 3 and 4 on the input switch to OFF.
1
2
Turn option 3 and 4 on the input switch to OFF. Cut off jumper BS.CE.
2
-
Turn option 3 on the input switch to OFF. Cut off jumper BS.AB.
2
1
Turn option 3 and 4 on the input switch to OFF. Cut off jumper BS.AB.
2
2
Turn option 3 and 4 on the input switch to OFF. Cut off jumper BS.CE. and BS.AB
