FAAC PARQUBE APS, Installation Manual, Page: 48 / 68

48 / 68 Ver. 1.1 - January 2017 - en-US
Installation
6.5 WALL SET-UP
T he station can be mounted using:
▫ a base built by the installer
▫ an optional plinth
6.5.1. Construction of the base
6.5.1.1 Recommendations for the construction to be followed
≥ 10 cm
Ø
e
a
b
f
i
h
g
d
c
l
k
m
Rj
1
Figure 11 - Dimensional recommendations for the APS base
Pos Element
1
T he area planned for cable routing inside
the station.
Ref. Mm Inch
a 708 27" 7/8
b 21 53/64
c 140 5" 33/64
d 551 21" 11/16
e M12 M 0" 1/2
f 40÷400 1" 37/64÷15" 3/4
g 750 29" 17/32
h 140 5" 33/64
i 200 7" 7/8
j r50 r 1" 31/32
k 147 5" 25/32
l 550 21" 21/32
m 380 14" 61/64
Leave at least 10 cm between the
station and the wall behind it to allow
proper ventilation ( Position of
devices)
The minimum height (f) of the base
allows you to observe the instructions
provided by ISO and ADA standards
for disabilities.
Do not exceed the maximum height.
I f the station is installed in a safety evacuation corridor, make sure that when the product's door is open, there is still
enough room to pass ( Position of devices ).