#
&
1. Open the gate leaf.
2. Place the operator on the fastening screws on the foundation box and fix it by using the sup-
plied nuts and washers.
3. The position of the motor must be as shown below. The pinion must be on the opposite side of
the leaves opening direction.
4. Manually close the leaf and fit the driving levers supplied, as seen below. Use the appropriate
lever for the degree of opening you will be using.
5.
Lubricate pinions and the pivots of the two levers.
NEVER lubricate the release
system.
Up to 110-Degrees
Over 110-Degrees
Summary of Contents for Estate Swing e-sU 2200 series
Page 1: ...Manufactured by...