#
'
%
Important: Wait until the cement from the previous step is completely set before beginning this
stage of installation.
1. Assemble the release levers on the support bracket and fit
the bracket on the pivot in the foundation box, also in-
serting the ball bearing in between the bracket and pivot.
NOTE: Lubricate the ball bearing, but DO NOT
lubricate the release system for any reason.
2. Create a guide bracket for
your gate. The materials for
this piece do not come with
the unit. Every gate has
different dimensions and require different guide brackets.
The axis of rotation for the opener should match the axis of rotation for the gate. (Meaning the
center of the pivot in the foundation box must align with the center of the hinge of the gate.)
This may mean different positioning of the gate in the guide bracket. Below are examples of
guide bracket set ups.
3.
Weld the guide bracket to the support bracket. Fit the gate into the guide bracket and put the
top gate hinge in place.
NOTE: Only weld the guide racket to the support bracket. Never weld the gate to
the guide or support bracket. This will ensure trouble free operation.
13”
C + 1
M
in
1
.5
7”
M
in
.4
”
C
Summary of Contents for Estate Swing e-sU 2200 series
Page 1: ...Manufactured by...
