AIRSLIDE
16
532225 - Rev.A
1
Tr
ansla
tion of the original instruc
tions
ENGLISH
6. ASSEMBLING THE HEAD SECTION
If the AIRSLIDE KIT has been supplied, the components must be
installed on the support profile. This operation is performed in the
shop. The assembled head section is then moved to the installation
site.
Handling instructions
14
.
RISKS
PERSONAL PROTECTIVE EQUIPMENT
REQUIRED TOOLS
Ø 18 mm
6-8-10-13
5-6
45°...
!
A torque wrench must be used to achieve the specified fastening
torques (Nm).
For manual lifting, arrange for an adequate number of people for the
weight of the leaf: 1 person for every 20 kg to be lifted.
6.1 ELECTRIC FAN MODULE AND PLATE WITH
CASE FOR E1AS BOARD
The electric fan module is supplied pre-assembled.
Also supplied is a plate with case attached containing the E1AS
electronic board and wiring connectors
1
.
A protective sheathing for the cables is provided, and must be applied
to the edges of the modules
1
-
.
The modules must be positioned so that they correspond with the
air outlet slots in the casing
1
-
.