8
ENGLISH
FAAC 959 B-E
Table 1: Technical specifications of 959 B-E Operator
Power supply
230 Vac (+6 -10%) - 50 (60) Hz
Absorbed power
100 W
Current drawn
0.5 A
Electric motor
24 Vdc with encoder
Dimensions
530 x 100 x 104 (length x height x depth)
Weight
10 kg
Ambient temperature
-15 + 70 °C
Housing protection
IP 23
Dimensions and max. weight of leaf
see Table 3 (section 1.1)
Duty cycle
continuous
Operation in event of power failure
Manual push/pull opening
Configuration of driving arms
• pushing articulated arm
(version for jamb depth 0
÷
125 mm)
• pushing articulated arm
(version for jamb depth 126
÷
250 mm)
• sliding arm
Anti-crushing device
standard
Opening angle
70
÷
95°
Opening time
3.5
÷
10 s (adjustable)
Closing time
6
÷
13 s (adjustable)
Max. weight of leaf
(kg)
Sliding arm
a
Cable hole
b
Support profile
c
959 MP electronic control unit
d
Position monitoring microswitch
e
Transmission shaft
f
Transmission shaft
f
Drive system
g
DC motor
h
959 B-E programming unit
i
Protective casing
j
Operating function switch
k
End cover (2)
Fig. 1
3
1
2
5
6
11
10
9
8
7
4
Max. weight of leaf
(kg)
Pushing articulated arm
Length of leaf
(mm)
mm
Sliding arm
Table 2: Technical specifications of 959MP Electronic Control
Unit + 959 B-E Programming unit
Power supply
230 Vac (+6 -10%) - 50 (60) Hz
Accessories power supply
24 Vdc / 500 mA max.
Electric lock power supply (N.O./N.C.)
24 Vdc / 0.5 A max.
Standard operating functions (switch)
Open / Automatic / Manual
(Night)
Adjustable functions (trimmer)
Opening speed - Closing speed
Pulling force - Pause time
Selectable functions (microswitches)
Overclosing stroke
Standard/non-standard initialisation procedure
Push and Go - Function switch (pos. “0”)
Terminal strip outputs
Malfunction alarm signal-
24 Vdc electric lock power supply
(N.O./N.C.) - 24 Vdc accessories power supply
Terminal strip inputs
Function switch/CODIS (optional) -
Internal / external / emergency /
STOP safety device / CLOSURE safety device
1.1 APPLICATION LIMITS
Important
: To ensure correct application of the FAAC 959 B-E
unit the weight of the door must not exceed the value given in
Table 3 corresponding to its length.
The maximum length of the leaf is 1000 mm.
The values of maximum weight vary according to the driving
arm used.
For each driving arm there is also a different maximum value for
the depth of the doorpost (Table 4) beyond which it is not
possible to install the system correctly.
Table 3: Application limits of 959 B-E automatic unit
700
130
-
750
124
-
800
118
92
850
113
89
900
108
85
950
104
83
1000
100
80
Table 4: Max. depth of doorpost
2. ELECTRICAL SETUP (fig. 2a Standard system)
a
959 B-E operator
b
Microwave radar / Passive infrared sensor
c
T20E external key-switch (KEY command)
d
Emergency Closing/Opening pushbutton
e
CODIS programming unit (optional)
f
CODIS inhibition switch (optional)
g
24 Vdc electric lock
h
Junction box
If the operator is installed on the door, make the electrical
connections using a junction box and suitable commercially
available pipes/unions
(fig. 2b)
.
Pushing
articulated arm
(Var. 02)
Pushing
articulated arm
(Var. 01)
0 - 125
126 - 250
0 - 160
The 959 B-E automatic unit for swing doors is a one-piece unit
consisting of an electromechanical device that allows door
opening to be controlled by means of a driving arm.
The operator can be installed either on the lintel or on the door
structure itself.
The aluminium protective casing houses the electronic control
unit used to program and control the operation of the system.
In the event of a power failure the door can be pushed (or
pulled) open manually.
1. DESCRIPTION AND TECHNICAL CHARACTERISTICS