1
2
746 E R
7
732099 - Rev.D
A
A
7
1
2
4
3
Tr
ansla
tion of the original instruc
tions
ENGLISH
2.3 UNPACKING AND HANDLING
RISKS
PERSONAL PROTECTIVE EQUIPMENT
1. Open the package and remove the contents.
-
Do not lift the gearmotor by the cover or the electronic
board. Grip the body of the gearmotor using the handholds
A
(
1
).
2. Check that all components are present and intact (See § Component
identification).
!
The packaging materials (plastic, polystyrene etc.) must not be left within
reach of children as they are potential sources of danger.
When you have finished with them, dispose of the packaging in the appropri-
ate containers, as per applicable waste disposal regulations.
VENT CLOSURE
!
The 746 E R is supplied with the vent hole closed with a screw and washer
(
2
). Whenever the gearmotor is handled, the vent must be closed to
prevent oil leaking out.
1
Gearmotor 746 E R
2
Gearmotor bracket guards and Hardware/accessories
3
Limit switches
4
Instruction manual
2.4 DISPOSAL OF THE PRODUCT
After having dismantled the product, dispose of it in compliance with
the current waste disposal regulations.
Components and structural materials, batteries and electronic components
must not be disposed of together with household waste. They must be taken
to authorised disposal and recycling centres.
The oil must be gathered in a watertight container and given to an authorised
disposal and recycling centre. Do not mix with other substances such as
antifreeze or transmission fluids. Keep the used oil away from sources of
heat and out of the children's reach. The fluid is not hazardous to health. In
case of contact with eyes, skin or clothing, wash and rinse the affected parts.
The technical data sheets of the fluids are available on request.
Summary of Contents for 746 E R Z20
Page 1: ...746 E R Z16 746 E R Z20 Translation of the original instructions...
Page 41: ...746 E R 41 732099 Rev D...
Page 42: ...746 E R 42 732099 Rev D...
Page 43: ......
