FAAC 746 E R Z20, Translation Of The Original Instructions

Page: 23 / 44

34
35
746 E R 23 732099 - Rev.D
J6
60 W max
17 16 14 15 13
M
L N MO
T C
O
M
MO
T1
MO
T2
L A M P
J5 J9
J4
J3
Tr
ansla
tion of the original instruc
tions
ENGLISH
 7
Board technical data
780D [230 V~] 780D [115 V~]
Power supply voltage 220-240 V~ 50/60 Hz 115 V~ 50/60 Hz
Max power 10 W 10 W
Max. motor power 1000 W 1200 W
Max accessories load 24 V
"
500 mA 500 mA
Ambient operating temperature -20°C to +55°C -20°C to +55°C
Flashing light 230 V~ - 60 W 115 V~ - 60 W
7.3 CONNECTIONS
F
Carry out the work with the power supply disconnected.
!
Do not exceed the maximum load of the outputs.
MOTOR
The connection to terminal board J6 is carried out at the factory (
34
).
!
DO NOT modify the factory connection. If the direction of rotation of the
motor has to be reversed, modify function
d l
in basic programming.
TERMINAL BOARD J6
15
COM Common (grey or blue)
16
17 MOT 1
MOT 2
Phase (black)
Phase (brown)
FLASHING LIGHT
Connect the flashing light to terminal board J6 (
34
).
MAGNETIC ENCODER
The magnetic encoder sensor detects the rotation of the magnet on
the shaft (
34
).
The sensor is integrated in the board and does not need to be con-
nected.
START-UP CAPACITOR
Connected at the factory: rapid connector J5 (
35
).
TRANSFORMER
The transformer is factory installed (connectors J3 - J4 ) (
35
).
MAGNETIC LIMIT STOP SENSOR
Connected at the factory: rapid connector J9 (
35
).
transformer
magnet