FAAC 724 D-24V, Instructions For Use Manual

Page: 13 / 76

11
ENGLISH
Notes on reading the instruction
Read this installation manual to the full before you begin installing the product.
The symbol indicates notes that are important for the safety of persons and for the good condition of the
automated system.
The symbol draws your attention to the notes on the characteristics and operation of the product.
CE DECLARATION OF CONFORMITY
Manufacturer:
FAAC S.p.A.
Address : Via Benini, 1 - 40069 - Zola Predosa- Bologna - ITALIA
Declares that: Control unit mod. 724 D
• conforms to the essential safety requirements of the following EEC directives:
73/23/EEC and subsequent amendment 93/68/EEC.
89/336/EEC and subsequent amendment 92/31/EEC and 93/68/EEC
Additional information:
This product underwent a test in a typical uniform configuration (all products manufactured by FAAC S.p.A.).
Bologna, 01-01-2004
Managing Director
A. Bassi
INDEX
1. GENERAL CHARACTERISTICS page.12
2. TECHNICAL SPECIFICATIONS page.12
3. PRELIMINARY SETTING-UP page.12
4. CONNECTIONS AND OPERATION page.13
4.1. TERMINAL BOARD M1 page.13
4.2 M2 TERMINAL BOARD page.13
4.3 M3 TERMINAL BOARD page.14
4.4 TERMINAL BOARD M4 page.14
5. INSTALLING A RECEIVER CARD FOR REMOTE-CONTROL page.14
6. CONTROL LEDS page.14
7. OPERATION OF DISPLAY page.15
8. ADJUSTING THE OPERATING PARAMETERS page.15
9. PROGRAMMING page.16
10. OPERATION OF ELECTRONIC CLUTCH page.16
11. PROTECTION FUSES page.16
12. CONNECTION LAY-OUT page.17
13. FUNCTION LOGICS page.18
15. HOW TO SECURE THE BOARD page.20