background image

8

ENGLISH

fig. 16

POSITIONING THE FORK SUPPORT FOUNDATION PLATE

To position the foundation plate of the fork support, refer to 

fig.16 where:

P1 = barrier foundation plate

P2 = fork support foundation plate

L = beam length (in mm)

A = L - 195 (in mm)

Whenever doing maintenance, always check correct 

settings of the by-pass screws, system balancing, and 

efficiency of safety devices. The automated system does 

not require any type of oil topping-up.

fig. 17

fig. 14

SKIRT KIT  (fig.14)

The skirt kit increases visibility of the beam.

It is available in lengths from 2 m to 3 m.

 

     If a skirt kit is installed, the balancing spring must be

     adapted.

FORK SUPPORT (fig.15)

The fork has two functions:

-  it prevents the beam, when closed, from bending or splitting 

if its end is stressed by extraneous forces.

- it allows the beam to rest when closed and thus prevents 

the profile bending downward.

fig. 15

ARTICULATION KIT (fig.17)

The articulation kit makes it possible to articulate a rigid 

beam to a maximum ceiling height of 3 m. (see specific 

instructions).

Dimensions are in mm.

fig. 18

END FOOT (fig.18)

The end foot allows the beam to rest when closed and thus 

prevents the profile bending downward.

For any repairs, contact FAAC’s authorised Repair Centres.

9 AVAILABLE ACCESSORIES

If the articulated kit is installed, the balancing 

spring must be adapted.

If a foot is installed, the balancing spring must be 

readjusted.

10 MAINTENANCE 

11 REPAIRS

Summary of Contents for 615












Reviews: