1 1
1 2
1 4
1 3
1 5
422 13
732870 - Rev.C
Tr
ansla
tion of the orig
inal instruc
tions
ENGLISH
Tr
ansla
tion of the orig
inal instruc
tions
ENGLISH
5.2 INSTALLING THE REAR BRACKET
RISKS
PERSONAL PROTECTIVE EQUIPMENT
!
The structure of the pillar must be suitable for fixing the actuator. If neces-
sary, create a solid support to which to attach it. It is the responsibility of
the installer to provide suitable fastenings for the applied loads. Welding
must be carried out in a workmanlike manner. Safety may be affected if it
is carried out badly.
L
i
Keep to the measurements indicated. If necessary, modify the length of
the rear bracket arm.
STEEL PILLAR
Weld the rear bracket arm to the pillar (
MASONRY PILLAR WITH PLATE TO EMBED
-
Embed the plate into the pillar (
).
-
Weld the rear bracket arm (
MASONRY PILLAR WITH SCREW-ON PLATE
-
Drill holes in the pillar and install the rear bracket plate (
Use dowels with suitable screws and fastening torque.
-
Weld the rear bracket arm onto the plate (
Summary of Contents for 422 Standard
Page 1: ...422 Translation of the original instructions...
Page 26: ...422 24 732870 Rev C...
Page 27: ...422 25 732870 Rev C...