manualshive.com logo in svg

F5 ARX-4000, Hardware Installation Manual, Page: 55 / 94

Share
Download
F5 ARX-4000 Hardware Installation Manual Download Page 55

Cabling

ARX®4000 Hardware Installation Guide

5 - 7

4. Attach the serial console cable to the serial console port. This port is 

identified in the following figure.

Figure 5.2  

ARX Back Panel Components

5. From the front of the switch, press the power button. The power 

button is located with the control plane LEDs. To locate the control 
plane LEDs, see 

Figure 5.1

. The following figure shows the exact 

location of the power button in the control panel.

For details on the control panel LEDs and buttons, see LEDs and 
Buttons, on page 4-7.

6. Attach the red F5 logo and front bezel.

Cabling

You can cable the client/server ports before or after the switch is connected 
to the network.

Ethernet cables are customer-supplied. For cable specifications and 
requirements, see Power Cord and Cable Requirements, on page 3-5. For 
cable connector and pinout information, see Cable Connectors and Pinouts, 
on page 3-6.

Summary of Contents for ARX-4000































































































Reviews:

No comments