TRT800H / P/N 800ATC-H-(2xx)-(2xx)
Operation and Installation
5
Document-No: 03.2124.010.71e / Revision: 2.10
1 GENERAL
This manual contains information about the physical, mechanical and
electrical characteristics and about installation and operation of the
Mode S Transponder TRT800H.
The conditions and tests required for TSO approval of this article
are minimum performance standards. Those installing this article
either on or within a specific type or class of aircraft must
determine that the aircraft installation conditions are within the TSO
standards which include any accepted integrated non-TSO function
standards. TSO articles and any accepted integrated non-TSO
function(s) must have separate approval for installation in an
aircraft. The article may be installed only according to 14 CFR part
43 or the applicable airworthiness requirements. This is an
incomplete system (antenna is required) intended to provide the
TSO functions specified in this Operation and Installation Manual,
section 5.1.
1.1 Symbols
Advices whose non-observance can cause radiation
damage to the human body or ignition of combustible
materials
Advices whose non-observance can cause damage to the
device or other parts of the equipment.
Supplementary information
