TRT800H / P/N 800ATC-H-(2xx)-(2xx)
Operation and Installation
29
Document-No: 03.2124.010.71e / Revision: 2.10
4 TRANSPONDER SETTINGS
4.1 Overview
The TRT800H is capable of storing the following information:
ICAO 24-Bit Aircraft-Address (AA)
Aircraft Category (AC),
Flight Identification (FID)
Ground-Switch (Yes/No)
Speed Category (RI)
RS232 Interface Configuration
All of these data are configurable in the Setup and are stored in the
external memory module integrated within the housing of the D-Sub
connector (included in the delivery).
The cable with this connector shall remain in the aircraft even if the unit
is removed, to ensure that the ICAO 24bit aircraft address is fixed to the
aircraft.
Additionally the following user/transponder related settings are stored
transponder internally:
Active Squawk
Passive Squawk
VFR Squawk
Altitude offset
Display brightness
4.2 Display Configuration Summary
Transponder provides the opportunity to show summary of complete
current settings. To access configuration summary pages push and hold
ID
in Standby mode. Release
ID
if
“SHOW SETUP” is displayed.
The summary is subdivided into the following pages :
