manualshive.com logo in svg

Ezytrail Stirling LX MK3, Owner'S Handbook Manual

The Ezytrail Stirling LX MK3 Owner's Handbook Manual is a comprehensive guide that provides detailed instructions and essential information for owners of this exceptional product. With a simple and user-friendly layout, this manual can be easily downloaded for free from manualshive.com, ensuring you have all the necessary knowledge to fully enjoy your Ezytrail Stirling LX MK3 experience.

Share
Download
background image

STIRLING SERIES

6

HOW TO HITCH YOUR COUPLING 

COUPLING 

To Attach Coupling To Towball:   

619350 (Fixed) & 619200 (Override) 

1. 

Rotate latch handle upward.

2. 

At the same time pull latch assembly up to lift tongue.

Page 1

Here is a short guide on how to safely attach and unattach your coupling from your towball 

1. 

Rotate latch handle upwards

To Attach Coupling To Towball:   

619350 (Fixed) & 619200 (Override) 

1. 

Rotate latch handle upward.

2. 

At the same time pull latch assembly up to lift tongue.

Page 1

2. 

At the same time pull latch assembly up to lift tongue.

www.alko.com.au

3. 

With latch assembly pulled back, lower the coupling onto tow ball

  

n

 

Ensure that a 50mm towball is fitted to tow vehicle.

 

 

n

 

No other size towball is safe to use with the coupling.

Page 2

4. 

Release latch assembly.

5. 

Check that the latch has released and is engaged in the coupling  

 

head indicated as “A” below.

6. 

Ensure that the ball is fully latched by attempting to lift the coupling 

 

vertically off the ball.

7. 

Connect all cable connectors and safety chains.

“A”

3. 

With latch assembly pulled back, lower the cou-

pling onto towball

 

- Ensure that a 50mm towball is fitted to 

 

   tow vehicle.

 

- No other size towball is safe to use with

 

  the coupling

www.alko.com.au

3. 

With latch assembly pulled back, lower the coupling onto tow ball

  

n

 

Ensure that a 50mm towball is fitted to tow vehicle.

 

 

n

 

No other size towball is safe to use with the coupling.

Page 2

4. 

Release latch assembly.

5. 

Check that the latch has released and is engaged in the coupling  

 

head indicated as “A” below.

6. 

Ensure that the ball is fully latched by attempting to lift the coupling 

 

vertically off the ball.

7. 

Connect all cable connectors and safety chains.

“A”

4. 

Release latch assembly.

5. 

Check that the latch has released and is engaged in the    

    coupling head indicated as “A” below.

6. 

Ensure that the ball is fully latched by attempting to lift the 

    coupling vertically off the ball.

7. 

Connect all the cable connectors and safety chains 

UNCOUPLING 

1. 

Disconnect all cable connectors and safety chains.

2. 

Use the jockey wheel to take the weight off the ball until head of the coupling is able to rotate.

3. 

Rotate latch handle upwards. As per step 1 in the attaching section

4.

 At the same time pull latch assembly upward to release towball. As per step 2 in the attaching section

5.

 Raise the coupling from the towball.

6.

 Release latch assembly.

Summary of Contents for Stirling LX MK3































































Reviews:

No comments

Related manuals for Stirling LX MK3

HeroCamper Ranger Livingstone Maintenance Manual preview
Ranger Livingstone
Brand: HeroCamper Pages: 6

Brands by name

Popular brands

Load more brands