STIRLING SERIES
12
3.
Next unwind both the forward and rear winches about 3.5-4m and attach to the anchor points
Raise and sercure your winches
Attach hooks to the anchor points
4.
Then unlatch all your catches and lift the lid by about 500mm, this is so when you start winching the lid
lifts rather than pulls straight against the hinges
Release the over-centre catches
Lift the lid around 500mm or so
before winching
5.
Using the front winch, wind until the trailer door goes just past 90 degrees, it will then start to fall before
the rear winch catches it. Once it is supported by the rear winch, use that to lower the lid down onto the
front of the trailer.
Use the front winch to get the lid
past 90 degrees
Then use the rear winch to safely
lower the lid into position
The winch should lock into position
like this
Unwind your winches
