Ezytrail Stirling LX MK3 Owner'S Handbook Manual Download

Page: 29 / 62

www.ezytrail.com.au

STORAGE & CARE

INTERIOR

To maximise the life of your camper/Camper you should consider additional protection from the elements. UV light and mois-

ture can have an adverse effect on materials when left unprotected outside. This section outlines some of the things you can

do as an owner to protect your investment.

EXTERIOR

Moisture in the smallest amounts can cause mould. High humidity and cooling temperatures can create condensation, ad-

ditionally condensation can form under mattresses due to temperature differences between warm bodies on top and the bed

base being cold from outside temperatures. As a precaution you can do the following:

•

Check under mattress for moisture before packing up. If moisture is found allow to thoroughly dry before closing your

camper.

•

Store 1 or 2 moisture absorbing packs/dehumidifier packs in the camper/Camper to draw away any residual water

vapour.

•

If packing up with damp canvas, open and dry out the camper at the first opportunity when returning home. Dry all

canvas thoroughly and follow point 2.

Ensure all seals on the camper have proper compression at 30-50%, are free of dirt and have no canvas protruding past the

seals. UV light and the elements can over time cause seals and fitting to perish and become brittle. The use of a camper

cover or tarpaulin will extend the life of components and keep your investment looking better for longer.

LONG TERM STORAGE

PAINTWORK

The paint coatings on your Camper are no different to that of your car in that they need regular care and maintenance.

Washing:

Only use mild detergents free of ammonia when washing your Camper. Always check the label to ensure the wash-

ing solution is nonabrasive, contains no ammonia or caustics.

Polishing:

New Campers should only be polished with wax-based polishes that are nonabrasive. When removing scratches

from paintwork use a fine finishing compound. Cutting pastes are too abrasive and will expose the base material.

Protection:

Carnauba wax is an excellent protection against oxidisation. The paint on your Camper should be waxed annually

regardless of being kept under cover to protect the surfaces from oxidisation.

Laminates and internal wall surfaces should be cleaned with a damp soft cloth. For stubborn marks use a mild detergent

based cleaner.

**Do not use cleaners that contain ammonia or caustics**

CARE OF PAINT & SURFACES

SURFACES

Summary of Contents for Stirling LX MK3































































Search results

Summary of Contents for Stirling LX MK3

Reviews:

Related manuals for Stirling LX MK3

Brands by name

Popular brands

Ezytrail Stirling LX MK3, Owner'S Handbook Manual

Search results

Summary of Contents for Stirling LX MK3

Reviews:

Related manuals for Stirling LX MK3

Brands by name

Popular brands