www.ezytrail.com.au
25
Use a window stay to help the zip along
Insert the hooked end of the pole
through the loops on each tent bow
Upright pole, followed by the ridge
pole, then the flat end spreader bar.
All Ezytrail annexes are free standing, but we suggest that you always use guy ropes, especially if there is a chance of wind.
7.
Once all the perimeter uprights and spreader bars are up, it’s time to put in the c clip uprights and spreader bars
C-clip spreader bars stop water from
pooling in bad weather
ANNEXE WALLS:
Now if you want a bit more privacy from other campers or the weather looks like
turning and you want to batten down the hatches, you’ll want to attach your annexe walls. It’s a fairly simple process and
shouldn’t take you more than 15 minutes to do.
1.
The first step is to lay out your annexe walls, make sure that the side with the PVC flap is going to be on the inside
of your trailer, this will make sure the d-ring is on the outside and you can peg your walls down
2.
Once again with the help of a friend start the zippers and zip away. Make sure you don’t forget to push down the
velcro for a good seal
