Live input status
All configured inputs of the ezeio
™
are listed in the Inputs table.
The
Graph
column shows a rough bar graph of the last minutes' data with the
most recent data to the right.
The
Value
and
Unit
columns show the current converted value of the sensor
input.
The
Count
column shows the number of pulse counts for the input. You may
alter this value manually by clicking the wrench icon next to the counter.
The count value is stored in non volatile memory every 90 seconds and
automatically restored on reset.
The
Raw
column shows the value from the hardware input before converting
it to a real world unit.
The
Alarms
column shows the current status of the four possible alarm
settings. Hover the mouse cursor over the symbols to see their meaning.
Output status and control
The outputs of the ezeio
™
can be controlled directly with the
on
/
off
buttons
in the output table. The drop-down box allows automatic shutoff after the
selected time.
Page 33 of 121
