For more information call 1-800-654-8168 or go to www.ez-dock.com.
16
5. Installation of EZ Port MAX with Small Bow Section to a Floating Dock using Hinge Kit
100751 & 100751SS
The 100751 or 100751SS hinge kit is required when anchoring an EZ Port MAX (206030PW-**) with half bow section
(206027BS-**). The half bow section should be attached to the EZ Port MAX with the screws provided prior to installation,
(See Page 7 Figure 1 for bow section installation instructions).
Measure the freeboard of the fascia of the floating dock where the connection will be made.
1.
Determine the best position for the hinge adapter plate. The plate can be above (Figure 15), perpendicular (Figure
2.
17), or directly in front of the hinge adapter bracket, (Figure 16).
No additional weight should be on the port while measuring hinge adapter plate location.
3.
When attaching to a wooden structure, use carriage bolts (not included) to attach the adapter plate. If attaching to a
4.
steel or aluminum structure, it may be necessary to first attach a 2” X 8” (5cm X 20cm) wooden fascia (not included).
When attaching to a concrete floating dock, concrete anchor bolts (not included) may be required.
5.
When the adapter hinge plate is securely in place, float the EZ Port MAX into position and secure the hinge pins.
6.
Tools required:
Drill
•
Drill bits
•
Ratchet and socket set
•
Screwdrivers (Phillips and standard)
•
Open-end, boxed-end wrench set
•
15/16” or 24mm socket
•
Pry-bar (small and large)
•
Tape measure
•
Hammer
•
Pliers
•
BILL OF MATERIAL
ITEM
QTY.
PART NO.
DESCRIPTION
1
1
206030PW-**
EZ Port MAX Entry
2
2
S21140SS
Connector Hardware w/ SS
3
2
S10751GV
Floating Dock Adapter, Hinge to Port MAX
4
2
S80968SS
Hinge Pin SS for Floating Dock Adapter
5
2
S10712GV
Hinge Dock Apater Plate - Hot Dip Galv.
6
2
80580SS
Nut 5/8”-11 Self Locking 18-8 SS
7
2
80011
Clip Hitch Pin #11, EZ Dock
8
1
206027BS-**
Bow Section, Half F/ Port MAX
Figure 15.
1
2
7
6
3
4
5
8
