For more information call 1-800-654-8168 or go to www.ez-dock.com.
21
Accessories - Rubber Mats S211010-****
Rubber mats are available for the Port MAX. These mats are used in pairs and can be applied to the Port MAX entry
section (206030PW-**), the Port MAX extension (206031PW-**) and the Port MAX Integrated Bow section (206032PW-**).
These rubber mats are available in the following color combinations:
S211010-BEBK
•
- Beige on Black
S211010-BEBL
•
- Beige on Blue
S211010-BLBE - Blue on Beige
•
S211010-BLBK - Blue on Black
•
S211010-SLBK - Silver on Black
•
Thoroughly clean the area. Be sure to remove any mold release, dirt, oil, etc. from the port. A glass cleaner used
1.
with a scotch-bright pad works well. Use a lint free rag to dry the area. Make certain the port is completely dry before
applying mats.
Position the mat on the port in the proper position. Use masking tape to hold in place.
2.
Peel back paper on one corner of the pad. Peel only a small amount at a time to reduce stretching the pad.
3.
Lightly stick corner of pad to the port. Check pad fit and adjust if necessary. Press firmly in place.
4.
Slowly remove the rest of the paper backing. Continue to adhere pad as you remove backing.
5.
Press firmly as you go to prevent air bubbles.
6.
Use a pin or tack to puncture any air bubbles and alleviate any air that may be trapped.
7.
Tools required:
Glass cleaner
•
Scotch-bright pad
•
Lint free rag
•
Masking tape
•
Tape measure
•
Pin or tack
•
Detailed View E
BILL OF MATERIAL
ITEM
QTY.
PART NO.
DESCRIPTION
1
2
S211010-****
Rubber Mats, Port MAX
Figure 18.
1
