►
Do not install or operate the device under environmental conditions
that deviate from the technical specifications. This mainly includes
areas with constantly high humidity levels and in direct proximity to
water, fire, radiators or ovens or exposed to direct sunlight or similar.
Deviating operating conditions can lead to electric shocks, fire or can
cause the device to crash.
Installation
►
The devices should be installed professionally by your dealer.
►
When unpacking or carrying the devices, at least two people are
needed. Make sure the devices are carried upright.
►
When installing the devices, use the designated frame supplied by
eyevis. Use a special vibration absorbing frame from eyevis when
using the devices in locations subject to vibration.
►
Do not place the device in an unstable location such as e. g.
inappropriate double-floors or inclines. Install on a horizontal, stable
surface instead.
►
Do not install the device in areas where the humidity or temperature
is high. Information on permissible environmental conditions can be
found in the
Technical Specifications
section on page 31.
►
Do not place objects on the device and take appropriate measures to
prevent the devices from falling down.
►
Do not block the ventilation holes on the device.
►
Always plug the power cable into the device before plugging it into
the outlet and do not locate the device where persons may trip over
the cable. If an extension cable is necessary, a cable with a current
rating at least equal to that of the device should be used.
Use
►
This device operates at high voltages. Never repair, modify or
disassemble the device by yourself.
►
Do not insert any objects into the device.
►
If there is thunder or lightning, do not touch the device, cable or
power plug.
►
Do not climb onto or stand on the device.
►
If the device will not be used for a long period of time, remove the
power plug from the wall outlet for safety.
►
Do not push or jolt the screen unit of the rear projection cube.
►
Do not operate the device with a damaged cable or if the device has
been dropped or damaged until it has been examined by a qualified
service technician.
►
caution:
Some parts of the device may become hot during operation.
6
openWARP²(-LC) User Manual
sAfety instructions
