System Status menu
This read-only menu provides information on the active sources and the
installed firmware version.
►
>
System Status
>
Wake Up from Sleep (WOD)
By default, the display will enter power saving (Sleep Mode) if no signal is
received for 5 minutes. Normally, the RS232, DisplayPort, HDMI and DVI inputs
are inactive in Sleep Mode, to save power.
To change the behaviour of Sleep Mode, change the "Wake up from Sleep"
setting in the "Advanced" menu.
1.
VGA Only (default) – The RS232, DisplayPort, HDMI and DVI inputs are
inactive when the display is in sleep mode. The display will wake up when
it receives a signal at the VGA input
2.
VGA, Digital, RS232 – The RS232, DisplayPort, HDMI and DVI input stays
active when the display is in sleep mode. The display will wake up when it
receives a signal at the VGA, DisplayPort, HDMI, or DVI input
EYE-LCD-4600/5500/6500-OPS
53
Version 1.1 | January 2015
