Eyevis EYE-LCD-4600-OPS User Manual Download Page 47

Page: 47 / 86

Audio menu

This menu is used for adjusting volume settings.

►

Audio

udio

Volume

Adjusts the sound.

Press

◄

►

, select the desired level and then press

ENTER

Range: 0-100 (Default: 50)

Bass

Adjusts the sound in low tones (bass).

Press

◄

►

select

the desired level and then press

ENTER

Range: 0-20 (Default: 10)

Treble

Adjusts the high tones (treble).

Press

◄

►

, select the desired level and then press

ENTER

Range: 0-20 (Default: 10)

Balance

Adjusts the balance of the left and right speakers.

Press

◄

►

, select the desired level and then press

ENTER

Range: 0-20 (Default: 10)

HDMI Audio Input

Selects HDMI audio input mode.

Press

◄

►

, select the desired option and then press

ENTER

Option: HDMI, Extern (Default: HDMI)

DisplayPort Audio

Input

Selects DisplayPort input mode.

Press

◄

►

, select the desired option and then press

ENTER

Option: DisplayPort, Extern (Default: DisplayPort)

Internal Speaker

Selects the internal speaker mode.

Press

◄

►

, to switch internal speaker ON/OFF and then press

ENTER

Option: ON, OFF (Default: ON)

EYE-LCD-4600/5500/6500-OPS

Version 1.1 | January 2015

Summary of Contents for EYE-LCD-4600-OPS























































































Search results

Summary of Contents for EYE-LCD-4600-OPS

Reviews:

Related manuals for EYE-LCD-4600-OPS

Brands by name

Popular brands

Eyevis EYE-LCD-4600-OPS, User Manual

Search results

Summary of Contents for EYE-LCD-4600-OPS

Reviews:

Related manuals for EYE-LCD-4600-OPS

Brands by name

Popular brands