User interface of the software
Main window / menu “Geometry”
All functions for adjusting geometry of the cube wall are in this window,
located in the section “Geometry”.
In the lower part choose the tab “Cube Geometry”.
1
Wall area
Shows the cubes of the video wall.
2
Button “Connect...”
Connects the software with the cube wall.
3
Buttons “ON” and “OFF”
Activates/deactivates the function of engine control.
4
Button “STOP ALL”
Stops all engines instantly.
5
Cube ID
Selects the cube ID for adjustment.
6
Duration
Adjusts the duration of the adjustment steps.
7
Buttons Size/Position/Rotation/Keystone
Function buttons for the geometry adjustment.
NOTICE
No effect if motors are off
If the motors are not turned on (point 3 in the table above), all commands
will be without any effect.
1
2
3
4
7
6
5
EC-LED-SLIM Series
44
User Manual
Summary of Contents for EC-LED-SLIM Series
Page 59: ...Notes...
