To assemble the basement:
1.
Connect both side basements (A) and (B) with the four crossbars (C) – (F)
using the screws (H).
2.
Screw the corner plates (L1) into each bottom corner of the basement. Use
the screws and washers (L2) provided.
3.
Now install the height adjustable feet (N1) to the corner plates as
illustrated in Fig. 12, step 3. Please observe the correct order of screws,
nuts and washers (N2) to ensure that the basement feet are properly
secured.
4.
Once the basement has been installed, make sure that it is absolutely
horizontal when it is in its final position e.g. by using a spirit level. This
makes the installation of further basements and the final installation of the
cube housings far easier and prevents the individual parts from moving.
Mounting the cube housing
Mounting the cube housing onto the basement
1.
Place a housing onto the first basement.
2.
The basement and the cube must be at least connected together using the
screws (O1) and washer (O2).
Fig. 13: Mounting the cube on the basement
CAUTION
Risk of injury when installing large video walls
When installing large video walls (3 or more cubes in vertical direction),
there is a risk of injury resulting from cubes falling or crashing down.
►
Use a crane when installing video walls of 3 or more cubes in vertical
direction.
►
If you do not have a crane available, take particular care when lifting the
cubes and climbing onto the video wall.
►
Observe the following instructions when installing the video wall.
(H)
(I1)
(I3)
(L1)
(N1)
(N3)
(N4)
(N2)
(L2)
(I2)
16x M8x25
2x
16x M8
4x
2x
2x
8x M10x25
2x
2x 10
2x M8
2x M6x25
2x M6x60
8x M12
8x M12
8x M6 washer DIN 125-A
(O2)
(O1)
8x M6x25
8x M6 washer DIN 125-A
EC-LED-SLIM Series
25
Version 1.2 | October 2018
Summary of Contents for EC-LED-SLIM Series
Page 59: ...Notes...
