Mounting the UGV basement
The UGV basement will arrive partly assembled and must only be adjusted in
the high and leveled.
Fig. 14: Completely assembled UGV basement
Adjustment of the high
The adjustment of the high must be done before the cube housing is mounted.
So first adjust the high of the UGV before starting with other steps.
First loosen and remove all 4 screws (front and back side) of each base
completely to move the upper part of the base up or down and than insert the
screws again.
It is only possible to tighten the screws in the predefined wholes.
All 4 screws incl. the washers must be tightened to secure the stability.
Fig. 15: Screws for adjustment of the high
EC-LED-SLIM Series
26
User Manual
Summary of Contents for EC-LED-SLIM Series
Page 59: ...Notes...
