Installation
►
The devices should be installed professionally by your dealer.
►
When unpacking or carrying the devices, at least two people are needed.
Make sure the devices are carried upright.
►
When installing the devices, use the designated basement supplied by
eyevis. Use a special vibration absorbing basement from eyevis when using
the devices in locations subject to vibration.
►
Do not place the device in an unstable location such as e.g. inappropriate
raised floors or inclines. Install on a horizontal, stable surface instead.
►
Do not install the device in areas where the humidity or temperature is
high.
►
Do not place objects on the device and take appropriate measures to
prevent the devices from falling down.
►
Do not block the ventilation holes on the device.
►
Always plug the power cable into the device before plugging it into the
outlet and do not locate the device where persons may trip over the cable.
If an extension cable is necessary, a cable with a current rating at least
equal to that of the device should be used.
Use
►
This device operates at dangerous electric voltages. Never repair, modify or
disassemble the device by yourself.
►
Do not insert any objects into the device.
►
If there is thunder or lightning, do not touch the device, cable or power
plug.
►
Do not climb onto or stand on the device.
►
If the device will not be used for a long period of time, remove the power
plug from the wall outlet for safety.
►
Do not operate the device with a damaged cable or if the device has been
dropped or damaged until it has been examined by a qualified service
technician.
►
Caution:
Some parts of the device may become hot during operation.
►
Caution:
Do not look into the projector light for longer time during
operation. May be harmful for the eyes.
EC-LED-SLIM Series
11
Version 1.2 | October 2018
Summary of Contents for EC-LED-SLIM Series
Page 59: ...Notes...
