Assembly / Installation
This section describes how to install the cube wall. This includes assembling
the basements, setting up the cubes and inserting the screens.
NOTICE
Before mounting the cube housing the projector must be taken out.
Preparation before mounting
The projector engine is mounted in the cube housing when delivered. It is
necessary to take the projector out of the housing before you start to assemble
the video wall.
The projector is secured so that he can’t move while transport. It is important
to take the security screws out before assembling the video wall.
Transport security 1
The projector is secured to the cube housing with 2 screws from the bottom
side of the cube housing. Take this 2 screws out, so that you can take the
projector out of the cube housing.
Transport security 2
The projector has on top side a transport security screw which must be
removed before the projector can be used.
Fig. 9: Position transport security screw projector
NOTICE
If the transport security screw is not removed before the projector is turned
on, the projector engine could be damaged!
NOTICE
For the exact position of the projector in the cube housing, are bolts on the
bottom. When lifting the projector out first lift the projector straight up so
that the bolts are not damaged and the projector not get damaged.
EC-LED-SLIM Series
22
User Manual
Summary of Contents for EC-LED-SLIM Series
Page 59: ...Notes...
