Setting up network communication
For network communication, the PC and the eyeDESIGN software must be set
up. The eyevis eyeDESIGN software is the special software to create and setup
video wall with eyevis products.
Please refer to the manual of the eyeDESIGN software for more information.
Network settings for the PC
After connecting the first display unit to the PC via network port, you have to
configure the network settings for your PC first.
To carry out the network settings for the PC:
1. To configure the network settings for your network adapter, open the
preferences of your Internet Protocol Version 4 (TCP/IPv4) as shown below.
You can find the settings in the file path:
Control panel/Network and Internet\Network connections.
2.
Click
Preferences
.
ª
This will open the window to enter the IP address.
3.
Enter the desired IP address (e.g. 192.168.0.2).
4.
Press Ok to finish the setting.
ª
Network setting of PC is finished
)
NOTE:
You can also communicate with the display units via the network or RS232.
)
NOTE:
All cubes have the same IP address (192.168.0.11), so never connect more
than one cube at the same time.
EC-LED-SLIM Series
40
User Manual
Summary of Contents for EC-LED-SLIM Series
Page 59: ...Notes...
