Cabling the cubes
The cubes are connected together via serial cables for control and monitoring
of the cubes. The cube wall is connected to the control PC via a RS232 cable.
Optionally a connection between cube wall and the control PC is possible via
Ethernet cable:
)
NOTE:
The RS232 to RJ45 is adapter cable with 1:1 wiring.
To cable the cubes together:
Use the RS232 to RJ45 adapter cables provided (RJ45 1:1 extension cable) and
connect each RS232 OUT to RS232 IN like a daisy chain. Proceed according to
the following diagram:
Fig. 38:
1
2
3
4
5
6
7
8
9
Serial daisy chain cabling
To connect the cubes to the control PC:
►
Connect the control PC (RS232 OUT) to projector 1 serial IN (RJ45) via a
RS232/RJ45 adapter and connect each projector serial OUT (RJ45) to the
next projector serial IN (RJ45) via CAT5 cable:
Fig. 39:
1
2
3
RS232/RJ45
Connecting the control PC to projector via RS232/RJ45 adapter cable
►
Connect the control PC to projector 1 via a CAT5 Ethernet cable and the
other projectors over serial connection:
Fig. 40:
1
2
3
Ethernet
Connecting the projectors to the control PC via ethernet cable
EC-LED-SLIM Series
37
Version 1.2 | October 2018
Summary of Contents for EC-LED-SLIM Series
Page 59: ...Notes...
