- 16 -
5-2 Operating procedures
Stop operating the unit if you notice
any abnormal conditions.
If you notice any abnormal condition, immediately
turn the power switch OFF and refer to the section
“Causes of troubles and countermeasures”.
Caution
Never touch the specimen flask or the
bath during condensation.
The bath and the specimen flask will be hot during
condensation and there is a danger of burning.
Caution
Caution
Never spill specimen on the unit.
If any specimen is spilt on the body or on the bath,
immediately wipe it out.
Some types of specimen may be ignited with heat
of the body or the bath.
Warning
Take care for conditions and
handling of glass parts
Broken or flowed glass parts may result in accidents.
Inspect for damages or flows on glass parts and take
care when handling them.
Continuous
specimen supply
port
Capillary feed tube
Water bath
（
SB-1300 type
）
Specimen flask
Cooler
（
S-type
）
Control panel
Jack handle
Continuous
specimen
supply port
Capillary
feed tube
Continuous
specimen
supply port
Capillary
feed tube
Cooler
（
E-type
）
Cooler
（
V-type
）
Receiver flask
