- 9 -
1. Raise the jack
(1) While holding the top surface of the “jack body”,
(2) Remove the “PP band” that ties around the stand
base and the driver together.
The jack body will go up to the upper end with the
spring force.
※
Note that the lifting force is stronger.
5-1 Preparation for operation
Operation
5
Be careful for jumping of the jack.
This jack is always under a lifting force.
When you release the lock, be sure to put your hand
on the jack.
Caution
Be sure to raise the jack before
setting glass parts.
First raise the jack before setting glass parts. If the
jack is raised during setting work, a personal injury
may result.
Caution
Be careful when handling the glass parts
Glass parts are easily damaged.
Handle them with care.
Caution
PP band
Jack body
Driving unit
Stand base
