For safe operation
1
- 1 –
Be cautions, high liquid temperatures bring the rise of burns
Caution
Do not touch the sample flask or the bath when you use the product at high liquid
temperature.
Also take care of the rotation speed of the flask because of possible splashing and
burning depending on the rotation speed.
Do not touch the rotation parts while the flask is rotating
Caution
Do not touch the clip or the specimen flask while the flask is rotating. Your finger
might be caught between protruding parts and grooves of the clip and get injured.
Do not put any objects below the jack
If any objects is caught or placed between the bottom of the jack and the top
surface of the stand base, a malfunction of the unit may occur or the unit may
fall down and cause a personal injury.
Caution
Check the up/down movement range of the jack
While lowering the jack, the flask may strike against the bath and glass may
break or the unit may fall down depending on the inclination angle of the
specimen or the size of the flask used.
Use the manual slide mechanism to adjust the up/down movement range
appropriately on based on the lower limit of the jack.
Caution
※
Do not put any
objects below the jack.
Clip
Sample flask
Water Bath
（
SB-1300, sold
separately
）
Manual slide
Caution
Use the thicker type of Rotary Joint for large sample flasks
Use the thicker type of Rotary Joint when 2L or 3L Sample Flask is used. Otherwise
there may be a possibility that the rotary joint is damaged that may cause some injury.
