Operation, cont’d
MVX Plus 128 VGA Matrix Switchers • Operation
3-22
PRELIMINAR
Y
2
. Press
and
hold
the RGBHV button for approximately 2 seconds (fi gure 3-35).
RGBHV
RGBHV
Press and hold the RGBHV button until it blinks.
2 seconds
= Blinking button
Figure 3-35 — Select
RGB Delay
mode
3
.
Press and release the output 17 button (fi gure 3-36).
3
1
2 3
INPUTS
1
2
3 4
5 6
9 10
7
8
1
Press and release the
Output
1 button.
The button lights green.
The Input 1 through Input 10 buttons display the selected output's RGB
delay. Each lit input button indicates half a second of delay.
In this example, the
green
input buttons display 3.5 seconds of RGB delay.
3.5
3.0
2.5
2.0
1.5
1.0
0.5
= Unlit button
= Lit button
Figure 3-36 — Select an output
4
.
Press and release the Esc (
>
) button once (fi gure 3-37) to increase the RGB
delay by a half second.
Press and release the Esc (
>
) button twice more to increase the RGB delay by a
whole second. Note the input button indication changes that occur each time
the Esc (
>
) button is pressed and released.
Figure 3-37 show the result of pressing the Esc (
>
) button a total of three
times.
ESC
ESC
ESC
INPUTS
1
2
3 4
5 6
9 10
7
8
1
3.5
4.0
4.5
5.0
3.0
2.5
2.0
1.5
1.0
0.5
Press the Esc button to increase the RGB interval that is applied to switches to
the selected output by a half second per button push.
= Unlit button
= Lit button
The Input 1 through Input 10 buttons display the selected output's RGB delay.
Each lit input button indicates half a second of delay.
In this example, the
green
input buttons display 5.0 seconds of RGB interval.
Figure 3-37 — Adjust the RGB delay interval
