3-19
MVX Plus 128 VGA Matrix Switchers • Operation
PRELIMINAR
Y
Example 5: Grouping inputs and outputs
In the following an example, several switcher inputs and outputs are assigned to
groups. The steps show the front panel indications that result from your action.
1
.
Press and release the Esc button (fi gure 3-28).
C O N T R O L
PRESET
ENTER
ESC
VIEW
Press the Esc button to clear all selections.
The button flashes once.
Figure 3-28 — Clear all selections
2
. To
enter
I/O Group
mode, press and
hold
the Input 1 and Output 1 buttons for
approximately 2 seconds and then release the buttons (fi gure 3-29).
1
1
1
2
3
3
1
2
3
Press and
hold
the Input 1
button and Output 1 button.
Release the Input 1 button
and Output 1 button.
Ungrouped input and
output buttons light.
2 seconds
Figure 3-29 — Select
I/O Group
mode
3
.
Press and release the Enter button to select group 1 (fi gure 3-30).
C O N T R O L
PRESET
ENTER
ESC
VIEW
Press and release the Enter button to select group 1.
The button lights amber to indicate the selection.
1
3
2
4
Group #
Figure 3-30 — Select an I/O group
4
.
Press and release the input 1 through 4 and output 1 through 4 buttons
(fi gure 3-31).
INPUTS
1
2
3 4
5 6
7 8
9
OUTPUTS
1
2 3 4 5
6 7 8
Press and release the Input 1 through Input 4 buttons.
The selected buttons light.
Press and release the Output 1 through Output 4 buttons.
The selected buttons light.
Figure 3-31 — Assign inputs and outputs
