MVX Plus 128 VGA Matrix Switchers • Quick Start
QS-2
PRELIMINAR
Y
Quick Start —
MVX Plus 128 VGA Matrix Switchers, continued
Esc button
cancels selections in progress and
resets the front panel button indications.
The Esc button does
not
reset: the current
confi guration, the RGBHV and audio
selection, any presets, or any audio level
or volume settings. On audio models, Esc
increments the level and volume. See
Viewing
and adjusting the audio level
in the next column.
RGBHV and Audio buttons
select/deselect
video and/or audio. The Audio button blinks
to indicate audio breakaway. The Audio
button also selects the audio level/adjust
mode. See
Viewing and adjusting the audio level
in the next column.
Create a tie
1
. Press and release the RGBHV/Video and/or
Audio I/O button(s) to select or deselect
video and/or audio as desired.
2
. Press and release the desired input button.
3
. Press and release the desired output button(s).
4
. Press and release the Enter button.
I / O
RGBHV AUDIO
Green
when selected.
Off
when
deselected
.
Red
when selected.
Off
when
deselected
.
5
The button lights to indicate the selection.
3
4
ENTER
8
Amber
indicates
RGBHV
/
video
and
audio
tie.
Green
indicates
RGBHV
/
video
only tie.
Red
indicates
audio
only tie.
Green
indicates the need
to confirm the change.
PRESET
PRESET
PRESET
PRESET
Preset button blinks.
Press and
hold
.
2 seconds
Save a
preset
Recall a
preset
Preset button lights.
Press and release.
All input and output buttons with
assigned presets light
red
.
The configuration data at assigned
preset locations will be overwritten
.
INPUTS
1
2
3
4
5 6
7
1
ENTER
The button blinks
red
to indicate that
this
preset
is selected to save or recall.
The Enter button blinks
green
to indicate the need
to activate the save or recall.
AUDIO
AUDIO
Audio button blinks.
Press and
Hold
2 seconds
1
2
5
Press an
Input button
to adjust
gain/attenuation
.
Press an
Output button
to adjust
volume
.
Output buttons
display
gain/attenuation
.
Input buttons
display
volume
.
ESC
VIEW
button decreases
the level or volume.
button increases
the level or volume.
Saing or recalling a preset
1
.
Save
a preset — Press and
hold
the Preset
button for 2 seconds.
Recall
a preset — Press and release the Preset
button.
2
. Press and release the desired input or output
button.
3
. Press and release the Enter button.
Viewing and adjusting the audio level
1
. Press
and
hold
the Audio button.
2
. Press an input or output button. See chapter 3
to read the displayed value.
3
. Increase and decrease the gain/attenuation
or volume level by pressing the Esc (
>
) and
View (
<
) buttons.
4
. Press and release the Audio button to exit.
