SW HDMI Series • Reference Information
35
5.
Drill 3/32 inch (2 mm) diameter pilot holes, 1/4 inch (6.3 mm) deep, into the mounting
surface at the marked screw locations.
6.
Insert #8 wood screws into the four pilot holes. Tighten each screw into the mounting
surface until slightly less than 1/4 inch of the screw head protrudes.
7.
Align the centers of the slots in the brackets with the mounting screws and place the
unit against the surface, with the screw heads through the bracket slots.
8.
Slide the unit slightly forward or back, then tighten all four screws to secure it in place.
Rack mounting options
The following table lists the rack mounting shelves and kits that are available rack from
Extron for mounting the SW HDMI switchers (see
www.extron.com
for part numbers).
RSU 129 9.5" deep 1U Universal Rack Shelf Kit
RSB 129 9.5" deep 1U Basic Rack Shelf
RSU 126 6" deep 1U Universal Rack Shelf Kit
RSB 126 6" deep Basic 1U Basic Rack Shelf
RSF 123 3.5" deep 1U Rack Shelf Kit
RSB 123 3.5" deep 1U Basic Rack Shelf
HRP 100 1U Half Rack Blank Panel
HRB 109 1U Basic Half Rack Shelf
HRU 109 1U Universal Half Rack Shelf Kit
MBU 123 Mini Under-desk kit
MBB 100 Back of the Rack Kit
Summary of Contents for SW HDMI Series
Page 6: ...SW HDMI Series Contents vi...
