Extron electronics ShareLink 200 N, User Manual

Page: 13 / 45

ShareLink 200 N • Installation 7
Using the Calibration Tool
This feature allows you to calibrate a touchscreen for accuracy, if needed. To calibrate:
1. Ensure that the touchscreen is connected to the ShareLink 200 N as follows:
a. Connect the touchscreen to the HDMI or VGA port on the rear panel of the
ShareLink (see
figure 2 ,
C
and
D
, on page 3).
b. Connect the touchscreen to the USB port on the front panel of the ShareLink
(see
figure 3 ,
B
on page 4).
2. Press the calibration icon twice on the standby screen (see
figure 4
,
2
, on the
previous page). The calibration screen opens:
Figure 5. Calibration Screen
3. Press the four red dots that appear on the corners of the screen. Each dot turns green after
it has been pressed. The
OK
button appears after all four dots are pressed.
4.
Press OK to return to the standby screen.
PRELIMINARY