Extron electronics PowerCage 401, User Manual

Page: 51 / 57

Passwords
The Passwords panel (see figure 36) provides an option to set administrator or user
passwords.
NOTE: The factory configured passwords for all accounts on this enclosure have been
set to the enclosure serial number. In the event of a complete system reset, the
passwords convert to the default, which is no password
Figure 36. Passwords Panel
To assign passwords, click the Set button in the
Passwords
panel. The
Passwords
dialog
box opens (see figure 37).
Figure 37. Passwords Dialog Box
To assign an administrator password:
1. In the Administrator Password field, enter the new password.
2. In the Confirm Password field directly under the Administrator Password field,
enter the same password from the field above.
3. Click the Apply button. The dialog box closes.
To assign a user password:
1. Ensure an administrator password is assigned.
2. In the User Password field, enter the new password.
3. In the Confirm Password field directly under the User Password field, enter the same
password from the field above.
4. Click the Apply button. The dialog box closes.
To remove passwords:
1. In the Administrator Password or User Password field, press the < Space > key on
the keyboard.
2. In the corresponding Confirm Password field, press the < Space > key on the
keyboard.
3. Click the Apply button. The dialog box closes.
To cancel pending changes:
Click the Cancel button. The dialog box closes.
36
37
PowerCage 401 Enclosure • Internal Web Page 43 43