Command
ASCII Command
(host to PowerCage)
Response
(PowerCage to host)
Additional Description
Resets
Erase all files from flash
memory
E
ZFFF
}
Zpf
]
Removes files created in
user space.
Reset unit settings
E
ZXXX
}
Zpx
]
Resets unit back to factory
default.
Absolute system reset,
but retain IP
E
ZY
}
Zpy
]
This reset is the same as
ZQQQ
except excludes IP
setting.
Absolute system reset
E
ZQQQ
}
Zpq
]
Master reset, resets IP
address and subnet mask
to default. Also resets all
installed boards.
IP system reset
E
1ZQQQ
}
Zpq1
]
Resets only IP settings.
NOTE:
The factory configured passwords for all accounts on this enclosure have been set to the enclosure serial
number. In the event of a complete system reset, the passwords convert to the default, which is no password (see
Password and security settings
on page 27 to change a password).
Reboot system
Reboot system
E
1
BOOT
}
Boot
1
]
Restart network
E
2
BOOT
}
Boot
2
]
NOTE:
Changes made to IP Address, Subnet Mask, DHCP, and/or Gateway Address do not take effect until the
2BOOT
command is issued, except for changes made via the CISG command (which takes place immediately and does not
require rebooting).
PowerCage 401 Enclosure • SIS Configuration and Control
31
